Specification
Dronetag Mini 4G transmits position and identification data adhering to Direct (Broadcast) and Network Remote ID regulations. Its transmission follows the standards outlined in prEN 4709-002 for the EU and ASTM F3411 for the US. Dronetag Mini is officially recognized as a Remote ID solution on the EASA website.
Mini 4G is available in two regional variants, Mini 4G EU and Mini 4G NA. They differ only in the LTE modem (cellular frequency range and bands); all other parameters are the same. See Mini 4G EU vs. Mini 4G NA.
| Parameter | Value |
|---|---|
| Cellular | LTE CAT-1 bis |
| Frequency range | EU: (703* external antenna only, band 28) 791-960 MHz, 1710-2170 MHz, 2500-2690 MHz NA: 699-894 MHz, 1710-2200 MHz |
| Cellular bands | EU: LTE-FDD: 1, 3, 5, 7, 8, 20, 28* NA: LTE-FDD: 2, 4, 5, 12, 13, 66 |
| Cellular transmitting power | Power Class 3 |
| Bluetooth (phone connection) | Bluetooth 4, Bluetooth 5 |
| Bluetooth output power | 8 dBm |
| Sensors | GNSS, barometer, accelerometer |
| Positioning | GPS L1, GLONASS L1, Galileo E1, BeiDou B1C, SBAS, QZSS |
| SIM card | Integrated SIM chip on the mainboard and slot for nano SIM |
| Built-in antennas | Internal LTE, Bluetooth and GNSS |
| Optional antennas | External LTE and Bluetooth via MMCX jacks |
| Battery | Li-Po 3.7 V 600 mAh |
| Battery life | up to 10 hours |
| Charging | 5 V USB-C |
| Charging time | 3 hours from a discharged state |
| Enclosure | SLA resin 3D printed |
| Fastening mechanism | 3M Dual-lock SJ4570 |
| IP rating | IP43 |
| Operating temperature | -20°C to +60°C (-4°F to 140°F) |
| Dimensions | 57.5 x 35 x 16 mm (2.26 x 1.37 x 0.63 in) |
| Weight | 36 grams (1.27 oz) |
Cellular Coverage
The coverage map below applies to Mini 4G EU. Mini 4G NA is intended for use in North America only (LTE bands 2, 4, 5, 12, 13, 66).
Dronetag Mini
Dronetag Mini 4G
All Sim Variants
All Continents